What Should The String Height Be On An Acoustic Guitar. The high ‘e’ treble string should measure between 1.59 mm (1/16″) and 1.98 mm (5/64″) at the maximum. Measure at the 12th fret from a seated position.
How do I know what a good action or string height is for from guitarassembly.com
It is important to note that to change your action height at the 12th fret a certain distance. you must multiply that number by two to. Again. using the feeler gauge. measure the gap between the top of the 1st fret and the bottom of the 6th string; For electric guitars. in our opinion. a good default string height at the 12th fret is typically about 6/64th of an inch (2.38mm) on the bass side and 4/64th of an inch (1.59mm) on the treble side.
Source: acousticguitar.com
My string is hovering just below the line in the image above. which puts the action at about 1.9mm. The steel string acoustic guitar measures 6 mm in diameter and 1 mm thick.
Source: tonereport.com
In addition to the slight increase in action height. acoustic guitars’ strings are able to. The distance between the string and the 1st fret would nearly always be below.020 (.5 mm).
Source: acousticguitar.com
The low e string has an 8mm diameter. Check the string height at the 1st fret.
Source: instrumentio.com
Next. i will take a measurement using the string action gauge. String height at the nut.
guitaranswerguy.com
Measure at the 12th fret from a seated position. The average string action of the guitars i set up is 3/32 inches on the bass side and 1/16 inches on the treble side.
stepbystep.com
You will develop a taste for how you like the action on an acoustic guitar. For electric guitars. in our opinion. a good default string height at the 12th fret is typically about 6/64th of an inch (2.38mm) on the bass side and 4/64th of an inch (1.59mm) on the treble side.
The Steel String Acoustic Guitar Measures 6 Mm In Diameter And 1 Mm Thick.
This distance plays a key role in your setup because it determines the ease in which your guitar can be played. Measure at the 12th fret from a seated position. The higher the strings. the more tension they have. and the harder it will be to fret the notes.
It Is Important To Note That To Change Your Action Height At The 12Th Fret A Certain Distance. You Must Multiply That Number By Two To.
The average string action of the guitars i set up is 3/32 inches on the bass side and 1/16 inches on the treble side. Check the string height at the 1st fret. The distance between the string and the 1st fret would nearly always be below.020 (.5 mm).
With That. Here Are Some Defaults To Aim For:
At the 12th fret. aim for about 2.38mm at the sixth string (thickest). and about 1.59mm at the first string (thinnest). The action height should be 2 inches (as shown in the photo) at the 12th fret. For acoustic guitars. we’ll want to go just a bit higher than this:
What Should The String Height Be On An Acoustic Guitar?
String height or action describes the distance between the top of your frets to the bottom of your strings. String height on a gibson acoustic guitar should be 4/64 at trebile side and 6/64 at the bass side measured at the 12th fret when set at the gibson factory. Action determines how much pressure and distance is required for the string to make full contact with each fret.
String Height At The Nut.
Its odd that the treble side is below spec and the bass side is way above spec. For either acoustic or electric instruments. however. you can make your preferences. Either there is too much neck relief.too much humidity for your guitar. someone filed the saddle wrong.