Oche Length In Cm. You can also measure throwing distance as 93.25 inches. 2.37 meter or 237 centimetres. Oche terms of reference approved by tchc board of directors 7 december 3. 2015 1 formatted:
Official Dartboard Height and Distance Expert Tips gameguy.net
It is 25mm high and 915mm long and placed in a position where the minimum throwing distance measured from the rear of the raised oche is 2.37m along the floor to a plumb line at the face of the dartboard. This can also be measured as a distance from the center of the bullseye to the oche in a diagonal (9ft. 7 3/8in). How do you set up a dart board in cm?
7 9 ¼” = 237 cm: It should be exactly 293 centimeters (9 ft.
If you are using soft tip darts. the distance from the wall to the oche need to be 8. The front edge of a darts board should be placed 7ft 9 1/4in (2.37 m) from the oche.
This is the recognized world standard as set by the world darts federation and is used in most areas. 7 9 ¼” = 237 cm:
9 7 ½ = 293 cm: Measure distance 7 feet 9 inches and a quarter from the front of the dart board to the front of the oche (throwing line).
Both measurements should be checked when hanging the board. 7 9 ¼” = 237 cm:
8 0 = 244 cm: The diagonal distance from the bulls eye to the oche. 9 ft.
If You Are Using Steel Tip Darts. The Distance From The Wall To The Oche Needs To Be 7 Feet. 9. 25 Inches.
How do you set up a dart board in cm? If you want to quickly check if your dart board is mounted at the correct height and distance. simply measure the diagonal line from the oche to the center of the bull’s eye. If you are using soft tip darts. the distance from the wall to the oche need to be 8.
Two Felt Gliders Protect Your Floor.
The height of the dartboard is set at 4 feet 6 inches (137 cm) and the throwing distance is 237 cm. both measured in the same manner described for the standard setup. You can also measure throwing distance as 93.25 inches. 2.37 meter or 237 centimetres. 7 9 ¼” = 237 cm:
The Diagonal Measurement Is 274 Cm.
Used in professional dart games. a standard oche is 2’ |.6 m wide and 1.5” | 38 mm tall to clearly establish the regulation throwing line. December 3. 2015to be updated after board approval. If you want to measure diagonally. the distance from the center of the board to the oche has to be 9 feet.
The Diagonal Distance From The Bullseye On The Dartboard To The Oche Back Should Be 2.98 Meters Or 298 Cm.
Casual darts environments may choose to use tape or another type of surface marking to identify the oche. The diagonal distance from the center of the bullseye to the back of the oche should be 9 feet 7.5 inches which come down to 293.4 cm. The front edge of a darts board should be placed 7ft 9 1/4in (2.37 m) from the oche.
In A Game Of 501 The Object Is For One Player Or A Team To Be The First To Reach Zero From Starting Total Of 501.
For steel tipped darts. it is generally 7 ft 9 1⁄4 in (2.36855 m) from the face of the dartboard. measured horizontally. It should be exactly 293 centimeters (9 ft. Ipswich fives (wide fives) tbc** 5 8 = 173 cm